Plumbing

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/2" NPT x 1-3/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

1-1/4" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field...

2" Bronze NPS to NPT Flange Adapter IBVF Flanged Adapters have been developed to address several common problems in the marine industry.   Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept...

2" Engine Flush Service Adaptor THE CONCEPT A simple quarter turn quick release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify...

3" NPT Bronze Pipe to Hose Fitting Features: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in...

3" NPT Bronze 90 Degree Pipe to Hose Fitting Features: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are...

ARG-2500 Series 2-1/2" Raw Water Strainer Non-Metallic Strainer Features: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options #304 SS...

BP-6 Poly Basket - 3.1 x 10.1" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

BP-8 Poly Basket - 3.1 x 12.4" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches...

Bronze Clam Shell Style Hull Strainer w/Mount Ring f/Up To 1" Thru Hull  Features: Mount ring design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter slots. Pressure relief holes in door casting. Specifications: Flow...

BS-12 Stainless Steel Basket - 3.1" x 11.9" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-3015

BS-7 Stainless Steel Basket - 3.1" x 10.6" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-2015

4"Bronze Flanged Seacock Features:  1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

2-1/2"Bronze Flanged Seacock Features:  1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

Jabsco Pressure Switch 24V 18916-1050

Jabsco Pump Macerator H.D.24V C.E 18590-2094Self priming pump with run dry protectionTriple sealed motor to prevent both internal & external motor corrosion.Four-bladed chopper reduces clogging.Flow rate to 12 gpm Self-priming to 4ft vertical lift...

Jabsco Seal Kit 90197-0000

Jabsco Water Puppy 12 Vdc Nitrile 186600123This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 4' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping...