Plumbing

Shurflo Elbow Fitting 1/2" x 5/8" 244-3936 Accommodates all SHURFLO demand pumps with 1/2" MPT. Hand tighten.

Shurflo Prowashdown Kit II Ultimate5.0 4358-153-E09 Includes everything you need for tough washdown applications, such as fish box, scaling and anchor chain cleaning. All in one kit includes the PROBLASTER II washdown pump that is self-priming, delivers...

Trident Hose 45 Degree Rubber Elbow with T Clamp 3" Trl345SSHigh temp molded black rubber. Comes with 4 stainless steel T-Bolt clamps. Made to marine standards. 250°F, SAE J2006 R3. 5 year warranty.

Trident Hose 90 Degree Rubber Elbow with T Clamp 5" Trl590SSHigh temp molded black rubber. Comes with 4 stainless steel T-Bolt clamps. Made to marine standards. 250°F, SAE J2006 R3. 5 year warranty.

Trident Hose Bilge Hose H.D. 1-1/8 x 50 1441186 A heavy-duty bilge, drain and livewell hose. Clear corrugated vinyl with Black PVC helix and smooth interior. Exceptional flexibility and bend radius. Not recommended for use below the waterline. Temp...

Trident Hose Clamps T-Bolt 1" 7201000Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Trident Hose Clamps T-Bolt 2-3/8-2-1/2" 7202120Used with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Trident Hose Clamps T-Bolt 8" 7208000LUsed with hose, elbows and bellows. 3/4" wide. 316 stainless steel band & 18-8 stainless steel T-bolt & lock nut (w/nylon insert). Very strong & secure for critical applications.

Trident Hose Heater Hose 5/8 x 50 1300586Used for engine cooling, ice box, sink, shower drain lines, A/C, bilge and bait box. 2 spiral EPDM hose resists heat, cold, engine water additives and coolants. 50 psi. Max temp of 212°, F. Black. 1 year...

Trident Hose Hose-Red Hot Water 50'X1/2 166-0126Reinforced PVC FDA approved hose for potable water uses. Tasteless, odorless and non-toxic. Not recommended for use below the waterline. Operating Temp 20°, to +150°, F. 2 Year warranty. Series 162:...

Trident Hose Tri Rubber 45D Elbow/Clamps 8 Trl845SSHigh temp molded black rubber. Comes with 4 stainless steel T-Bolt clamps. Made to marine standards. 250°F, SAE J2006 R3. 5 year warranty.

Attwood Marine Thru Hull SS 5/8" 66546-3Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only. Lifetime warranty.

Attwood Marine Thru-Hull 1 1/8" 3874-3Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.

Beckson Marine 24 Hand Pump with 24 Hose 124Pf Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive...

Beckson Marine Hand Pump 18" 118P Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.

1" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount...

1-1/2" Bronze In-Line Check Valve Features: C83600 cast bronze construction NPT threaded ports 1/2" - 2" sizes Suitable for use with diesel fuel or gasoline

1-1/2" NPT x 1-3/4" Bronze Full Flow Pipe to Hose Straight Fitting Features: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and...

1-1/4" Bronze Flanged Full Flow Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and...

1-1/4" Bronze Tri-Flanged Ball Valve/Seacock Features: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug The zerk can also be used for draining Field reversible...