Pettit Aluma-Protect Aluminum Barrier Coat Kit

ALUMA PROTECT STRONTIUM CHROMATE ALUMINUM EPOXY PRIMER

• Easy to Mix and Apply

• Epoxy Primer for Aluminum

• Strontium Chromate for Maximum Corrosion Control

• Smooth finish provides an excellent bonding surface for additional primers or topcoats.

Aluma Protect 4400/4401 is a 2 part strontium chromate primer designed to form the ideal barrier coat over roughed bare aluminum. This is the appropriate epoxy to use when aluminum has been sandblasted, sanded or ground so that a tooth is present. 

AlumaProtect provides maximum resistance to fresh or salt water, thus eliminating corrosion. This complete coating system resists water, industrial chemical fumes, and very humid environments. Intended to be used as a primary coat over bare aluminum hulls and outdrives. AlumaProtect 4400/4401 will chalk if not topcoated. Two coats are recommended over sandblasted aluminum. Then overcoat with Pettit Protect 4700/4701 for optimum results before finishing antifouling paint.

93-44004401G  93-44004401KT