Anchoring & Docking

Tiedown Engineering HD Plate Hoop Roller 26415Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12"...

Tiedown Engineering Hdinside Corner 3" Inein 26404E. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set "M" for attaching.

Tiedown Engineering Inside Corner 10.5 26424D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner 26417D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner 26524D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Corner Sq Holes 26401D. Should be used with one of the outside corners. Each leg has elongated holes for easy fit.

Tiedown Engineering Inside Roller Ramp Bracket 1 Pr/Pk 264315" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets

Tiedown Engineering Internal Pile Holder with Rolrs 26434Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16".

Tiedown Engineering Lag Bolt with Wash 3/8X 2-8/Bg 24287Bolt and flat washer hot dip galvanized used to attach flotation drums to dock system.

Tiedown Engineering Male T Connector 26427H. Use with Female T connector to attach fingers and ramps. Bolt set "N" required for joint.

Tiedown Engineering Male T Connector Inhin 26408H. Use with Female T connector to attach fingers and ramps. Bolt set "N" required for joint.

Tiedown Engineering Male T-Connector 26532H. Use with Female T connector to attach fingers and ramps. Bolt set "N" required for joint.

Tiedown Engineering Mounting Base Magma Grill Ketl 86913This mounting bracket provides secure mounting support for Magma's Kettle grills. Requires 1 receiver.

Tiedown Engineering O/S Corner Male 10 25491B. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.

Tiedown Engineering Outside Corner (Female) 26521A. Two 1/2" welded tabs. Use with a male outside corner.Each leg is 10"L x 5"H.

Tiedown Engineering Outside Corner (Male) 26522B. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.

Tiedown Engineering Outside Corner 1.5 26428C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners.

Tiedown Engineering Outside Corner End 26523C. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners.

Tiedown Engineering Outside Corner Male W-Tab 26418B. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.

Tiedown Engineering Pile Chain Holder 26419For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters.